Laundry Tips: Installing and Using The Drying Rack | Kenmore Dryers


[MUSIC PLAYING] With the dryer door open, slide
the rack into the dryer drum. Make sure the front of the
rack is seated properly in the recess of the lint filter
housing at the front of the drum. The two rear legs of the
rack should be resting on the rear wall just above the drum. Place items to be dried on the rack. Make sure that no parts of the article
hang over the edges of the rack, as they might be contacted by
the rotating drum, causing noise or damage to the drum for articles. Be sure to remove the drying rack
after using the rack dry cycle. [MUSIC PLAYING]

2 thoughts on “Laundry Tips: Installing and Using The Drying Rack | Kenmore Dryers

Leave a Reply

Your email address will not be published. Required fields are marked *